Skip Ribbon Commands Skip to main content

Trodat
Laser rubber

AERO+​
PR_Laser_Rubber_AeroPlus_small.jpg


​Aero+ is the logical advancement of the successful and odourless Aero laser rubber. The readapted material formula saves filter costs and makes cleaning easier due to minimal dust residue when processing with the laser. The significantly softer Aero+ is not only suitable for delicate designs, it also delivers top impression quality for bold letters and full-surface designs. Aero+, which produces no odour while engraving, works for water-based as well as solvent-based and slightly acidic inks.​

Sizes: A4/2.3 mm and A3/2.3 mm 
Colour: Pearl grey
Hardness: 52 ShA​

A​ERO 

PR_Laser_Rubber_AeroPlus_small.jpg

Odour developing from laser processing of text plate rubbers belongs in the past. While low-odour products were previously associated with significant loss of productivity and engraving speed, Trodat offers odourless engraving at full efficiency with the Aero. It's suitable for water-based, solvent-based, and slightly acidic ink, is especially simple to clean, and is characterised by excellent engraving and imprint quality.


Sizes: A4/2.3 mm and A3/2.3 mm
Colour: light grey
Hardness: 55 ShA

Tempo

 

Tempo Laser Rubber 

Do you want to create productivity reserves without immediately having to invest in machines or personnel? The Tempo is one of the fastest inscribable text-plate rubbers. It therefore enables you to increase your capacity easily. It's suitable for water based ink and guarantees excellent engraving and imprint quality.


Sizes: A4/2.3 mm and A3/2.3 mm
Colour: orange
Hardness: 60 ShA

ECO 

Eco Laser Rubber 

Even although all products from Trodat are responsibly manufactured, the Trodat Eco consists of natural rubber -- a renewable raw material. It's suitable for water based ink and guarantees excellent engraving and imprint quality.


Size: A4/2.3 mm
Colour: green
Hardness: 55 ShA

Classico

 

Classico Laser Rubber 

The Classico is, as the name implies, is the classic among laser rubbers. It's the ideal product for every stamp producer who expects excellent engraving and imprint quality, but does not consider odourless or time-saving engraving as their priorities. It's suitable for water-, solvent-based, and slightly acidic ink.


Sizes: A4/2.3 mm and A4/1.5 mm (for Goldring)
Colour dark grey
Hardness: 60 ShA

Olio

 

Olio Laser Rubber 

Trodat has developed a laser rubber for oil-based inks so that stamp producers can accommodate any possible market requirements. The Olio is suitable for water-based and slightly acidic ink. It doesn't swell up with oil inks either and it offers excellent engraving and imprint results.

 
Size: A4/2.3 mm
Colour: black
Hardness: 55 ShA

Micro

 

Micro Laser Foam 

Use only the best text-plate material for your pre-inked stamp. The Trodat Micro's laser-inscribable, microporous foam offers very good absorption behaviour and an ideal surface structure. Therefore it meets the highest demands for engraving and imprint quality.


Size: A4/6 mm
Colour: black